i.MX95 OSM System-on-module

SOM-iMX95-OSM

Geniatech SOM-iMX95-OSM is a high-performance solder-down system-on-module based on NXP’s flagship i.MX95 applications processor. It combines advanced multicore processing, dedicated real-time control, and a powerful NPU into a compact, standardized OSM-L footprint, designed for demanding applications from robotics to smart infrastructure.

Compliant with OSM-L standards, LGA package, customizable carrier board
NXP® i.MX 95 processor with 6x Cortex-A55 cores at up to 2.0 GHz.
Dual real-time co-processors: ARM Cortex-M7 and ARM Cortex-M33.
NXP eIQ® Neutron NPU for on-device AI inference.
High-performance ARM Mali GPU for graphics acceleration.

Standardized OSM-L Form-Factor

Vendor-neutral open standard for design freedom, reuse, and longevity
High pin-to-area ratio for rich connectivity in a compact 45×45 mm footprint
Rugged LGA solder mounting for high reliability in industrial environments
Industrial temperature range of -40°C to +85°C

Feature Highlights

6x Cortex-A55 cores + 2x real-time cores (Cortex-M7 & Cortex-M33)
ARM Mali GPU, 4K VPU & AI/ML NPU (NXP eIQ® Neutron)
Up to 16GB LPDDR5 and 128GB eMMC
Rich Connectivity: Dual GbE, PCIe, CAN-FD, MIPI, USB, and serial interfaces.

Software and Development Support

Linux (Yocto Project) with long-term support maintenance
Full Board Support Package (BSP) and ready-to-run images
Support for OTA (Over-the-Air) updates and remote device management
Advanced security with NXP EdgeLock and trusted execution environment
Pre-validated driver packages for display, AI, and peripheral integration

From SOM to Complete Systems

Carrier Board Design and Manufacturing Services
Ready-to-use development kits for rapid evaluation
Turnkey box-level integration for deployment-ready systems
Custom LCD panel driver adaptation and display integration
Direct technical support from Geniatech engineering team

Accelerate Your Product Development

Full design package including schematics, BOM, and PCB layout files
Proven reference designs for all key interfaces
Free design review for your custom board
Streamlined service from prototype to mass production quantities

Processor
Chip model		NXP i.MX95
CPU		6 Core ARM Cortex-A55 + ARM Cortex-M7 + ARM Cortex-M33
NPU		NXP eIQ® Neutron Neural Processing Unit
GPU		ARM Mali-G310 Graphic Processing Unit Supports 64 GFLOPS (FP32) of 3D graphics performance, OpenGL ES 3.2, OpenCL 3.0.
VPU		4K video decode and encode
Memory and Storage
RAM		4GB(LPDDR5, optional 8GB/16GB)
ROM		32GB（optional 64G/128G）eMMC
Hardware Source
MIPI CSI	1	One 4-lane MIPI CSI-2 camera input
MIPI DSI	1	One 4-lane MIPI DSI display with data supplied by the LCDIF
USB	2	USB 2.0 controllers and PHYs interfaces
Ethernet	2	Two Gigabit Ethernet controller with support for TSN in addition to EEE, Ethernet AVB, and IEEE 1588
SD	1	Supports 1-bit / 4-bit SD bus Channel 0 supports SDHI / e-MMC (boot supported) Channel 1 supports SDHI Compliant with SD 3.0 Supports default, high-speed, UHS-I/SDR50, SDR104 transfer modes supported
CAN	1	One Controller Area Network (FlexCAN) modules, each optionally supporting flexible data-rate (FD)
SPI	2	Supports master and slave modes
UART	3	Supports hardware or software flow control;
I2C	3
PWM	2
Watchdog	1	Watchdog Timer;
PCIe	2
Audio	2	Three SAI interfaces
GPIO	24
Mechanical & Electrical Specifications
Package		LGA package，OSM 1.1 standard
Size		45mm × 45mm
Power supply		5V